Skip to main content

Forward Deployed Engineers: The End of "Here's the Platform, Good Luck"

What a forward deployed engineer is, how it differs from a consultant, and how FlowFuse puts one to work in your plant

Sumit Shinde
BySumit Shinde||5 min read|Expert Reviewed
Image representing Forward Deployed Engineers: The End of "Here's the Platform, Good Luck"
TL;DR
  • A forward deployed engineer (FDE) is employed by a software vendor and works alongside your team to solve a specific problem using the vendor's platform.
  • A consultant is measured on delivering the agreed scope. An FDE is measured on whether the problem gets solved and the solution stays in use, as long as the vendor isn't billing for their time separately.
  • Before signing with anyone, check how the engagement is paid for and what you keep when it ends.

Most vendors still sell industrial software the same way: deliver the platform, run a training session, and leave the rest to you.

In Build vs buy? Neither answer survives the second plant, our CEO Michael Davis argued that manufacturers should buy the foundation every site shares and build only where plants differ. Few plant leaders argue with that split. The harder question is who does the building, when the engineers who could do it are already stretched across shifts, changeovers, and breakdowns.

At FlowFuse, our answer is forward deployed engineers. Below, we explain what the role involves, how it differs from hiring a consultant, and how we run these engagements at FlowFuse.

What "good luck" leaves behind

The problem with handing over a platform and walking away is that the work has only just begun. Industrial software has to fit around equipment that may be decades old, production processes that cannot simply stop, and teams that already have more responsibilities than they can comfortably manage. None of that gets solved in a training session.

At a pipe manufacturer, a digitalization lead and one colleague are responsible for connecting more than a dozen plants. As they put it, "It's just my colleague and I for all of those plants." IT's "responsibility ends at the firewall."

At another manufacturer, the engineer who established the company's connectivity software left. The knowledge of how its systems connected went with them.

These aren't isolated implementation problems. They expose a weakness in how industrial technology is delivered. Ivan Getov, who writes The Floor Report for maintenance managers, describes the pattern Industry 4.0 has brought to the plant floor: "Buy the sensor. Buy the platform. Buy the AI copilot. Buy the dashboard."

Manufacturers have no shortage of technology to buy. What they lack is the engineering capacity to make it work together, fit it to production, and keep it working as their operations evolve. Too often, vendors deliver the software while leaving manufacturers to take responsibility for everything that makes it useful.

Someone has to do the building. Our engineers build your first application alongside your team, and you keep everything they build. Build with us

What does a forward deployed engineer do?

A forward deployed engineer (FDE) is an engineer from the software vendor who works inside the customer's operation. They learn the problem, work through the plant's constraints, and adapt the software until it runs the way the line needs it to. That can mean integrating existing systems, building applications, or working alongside operators and engineers until the solution is live.

But isn't this what consultants already do?

FDE vs. consultant

The difference isn't where the engineer works. It's the commercial relationship, the responsibility they take on, and what the customer is left with when the engagement ends.

A consultant is typically hired for a defined project, with success measured against an agreed scope. Once the work is delivered, the engagement usually ends. If the customer wants to take the solution to another plant, that can mean another project, another budget, and another round of implementation.

A forward deployed engineer works for the technology vendor, and success is measured on the plant floor: is the problem solved, and does the solution stay in use? Because the vendor is paid through the software, the work isn't finished at go-live. It's finished when the customer's team can run and extend what was built, and carry it to the next plant.

That only holds if the commercial model supports it. If a vendor sells FDE time as a separate services line, the FDE is a consultant with a different badge. The title alone guarantees nothing, so check how the engagement is paid for and what you keep when it ends.

ConsultantForward deployed engineer
EmployerThird-party consultancy or system integratorSoftware or platform vendor
Primary goalDeliver the agreed scope on time and budgetSolve the customer's problem and keep the software in use
Scaling modelNew engagement for each siteCan reuse the first deployment at the next site, if the engagement is set up for it
Commercial modelTime and materials, or fixed-fee projectIncluded in the recurring license or partnership agreement

How FlowFuse does it

At FlowFuse, we built our approach around those two questions: how the work is paid for and what you keep when it ends.

Every engagement starts with one operational problem and the people closest to it. Operations defines what needs to improve, a controls engineer brings knowledge of the equipment, and IT handles access and security. Before development begins, we agree on a target and record a baseline so both sides know what success looks like.

The first deployment, the platform, and our engineers' time are covered by one recurring license. There's no separate services bill. We're not paid by the hour. Our success depends on building something that solves your problem and continues to deliver value.

Our engineers build alongside your team, putting working versions in front of operators and shift leads early. Their feedback shapes the application, while all development follows your site's safety and change-control procedures.

At handover, you keep the applications, flows, documentation, and project files. Built on Node-RED and open standards, your applications remain portable and can run on a standard Node-RED runtime. Your team can maintain, modify, and extend them independently. FlowFuse provides the foundation for building, deploying, managing, and scaling industrial applications across your plants.

The first deployment also becomes a starting point for the next plant. Your team can reuse application logic, dashboards, and integrations, adapt them to the new site's equipment, and deploy through the same platform. Instead of rebuilding from scratch at every facility, you build on what already works.

The industrial software industry has spent years making technology easier to buy. It's time to make it easier to put to work.

Scope Your Foundation Partnership

Pick one problem that's costing you output or uptime. Your team builds the solution with ours, on the systems you already run, then owns and extends it.

Frequently Asked Questions

About the Author

Sumit Shinde

Technical Writer

Sumit Shinde is a Technical Writer at FlowFuse specializing in industrial automation and manufacturing. In the past three years, he has built industrial applications and authored more than 100 technical articles covering industrial connectivity, unified data architecture, production metrics, and quality management for modern manufacturing.